Precautions
This projection monitor operates on extremely high voltage. To prevent fire or electric shock, please follow the precautions below.
On safety
∙Check that the operating voltage of your unit is identical with the voltage of your local power supply.
∙One blade of the plug is wider than the other for safety purposes and will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.
∙Should any liquid or solid object fall into the cabinet, unplug the monitor and have it checked by qualified personnel before operating it further.
∙Unplug the monitor from the wall outlet if you are not going to use it for several days or more. To disconnect the cord, pull it out by the plug. Never pull the cord itself.
∙The fans inside the monitor continue working for a while even after the monitor has been turned off. Do not unplug the monitor from the AC outlet while the fans are working.
On installation
•To prevent internal heat
•Do not install the monitor in a hot or humid place, or in a place subject to excessive dust or mechanical vibration.
On screen
The screen surface is easily scratched. Do not rub, touch or tap it with sharp or abrasive objects.
Be especially careful when transporting the monitor.
On blanking around the pciture
The monitor displays black masks between the picture and the screen vessel because the monitor
To adjust the size and position of the picture, see pages
16and 17.
Blanking
Picture
Screen vessel
On moisture condensation
If the projection monitor is transported directly from a cold to a warm location, or if the room temperature has changed suddenly, the picture may be blurred or show poor color. This is because moisture has condensed on the lenses inside. If this happens, leave the power on and let the moisture evaporate before using the monitor.
On cleaning
•Clean the cabinet of the monitor with a dry soft cloth. Stubborn stains may be removed with a cloth slightly dampened with solution of mild soap and water, then wipe it with a dry soft cloth.
•Do not use any type of solvent such as alcohol, benzine, thinner or insecticide. Such solvent may damage the finish of the monitor or erase the indications on the panel.
•To remove dust from the screen, wipe it gently with a dry soft cloth.
•Stubborn stains on the screen may be removed with a soft cloth slightly dampened with solution of mild soap and water.
•If the picture becomes dark after using the monitor for a long period of time, it may be necessary to clean the inside of the monitor. Consult qualified service personnel.