Stabilizing the monitor

Using the brackets

After setting up, secure the monitor to a wall, etc. with the supplied brackets.

1 Mount the two supplied brackets with the screws to the upper rear sides of the monitor.

Bracket (supplied)

2 Pass a strong cord or a chain through each bracket mounted in step 1, and then secure it to a wall or a pillar, etc.

For customers in Japan and the U.S. only

Using the support belts (not supplied)

You can also use the BLT-R10 support belt for the monitor stand (not supplied) to secure the monitor. We recommend you use the SU-90 monitor stand with which the support belts are supplied.

About the SU-90 monitor stand (not supplied)

The dimensions of the stand are 1,050 x 700 x 630 mm (41 3/8 x 27 5/8 x 24 7/8 inches) (width/height/depth). Before you purchase this stand, refer to the dimensions above and check the size of the area where the stand will be installed.

Customers in Japan should use the stand SU-90T. Customers in the U.S. should use the stand SU-90U.

Rear

Front

6-GB Getting Started