Connecting to video equipment
To a VCR not equipped with an S video connector
Rear of the monitor
VIDEO IN | VIDEO | COMPONENT IN | |
1 | 3 | OUT |
|
|
|
| Y |
S VIDEO |
|
|
|
|
|
| |
to VIDEO 1 IN or | VIDEO | ||
VIDEO 3 IN | |||
|
| ||
| L | L | |
| AUDIO | AUDIO | |
| R | R |
to video/audio outputs
VCR
You can also use the VIDEO 2 IN jacks on the front of the monitor for the video/audio connections.
To an S video equipped VCR
Rear of the monitor
VIDEO IN | 3 | VIDEO | COMPONENT IN |
1 | OUT |
| |
|
|
| Y |
S VIDEO |
|
|
|
to VIDEO 1 IN or |
|
| |
|
|
| |
VIDEO 3 IN |
|
|
|
VIDEO |
|
| |
L |
|
| L |
AUDIO |
|
| AUDIO |
R |
|
| R |
|
|
| |
(not supplied) |
|
|
|
to S video/audio outputs
VCR
Notes
•You can also use the S VIDEO connector on the VIDEO 2 IN panel on the front of the monitor.
•When you connect the cable to both the VIDEO jack and the S VIDEO connector, the picture from the S VIDEO connector is displayed on the monitor screen.
Connecting two VCRs for editing
The monitor outputs the signal input from the VIDEO 1 IN, VIDEO 2 IN or VIDEO 3 IN jacks through the VIDEO OUT jacks. With two VCRs connected to the VIDEO IN and VIDEO OUT jacks, you can edit a tape.
Notes
•Signals input from the RGB 1 IN, RGB 2 IN and COMPONENT IN connectors are not output through the VIDEO OUT jacks.
•Do not connect both the VIDEO IN and VIDEO OUT jacks on this monitor simultaneously to the video/audio output and input jacks on a single VCR.
•If no signal is input to the S VIDEO connector on any of the VIDEO 1, 2 and 3 IN panels, the S VIDEO connector on the VIDEO OUT panel does not output a signal.
GB
Rear of the monitor
VIDEO IN |
| VIDEO |
1 | 3 | OUT |
S VIDEO |
|
|
to VIDEO 1 IN | VIDEO | to VIDEO OUT |
or VIDEO 3 IN |
| |
|
|
L
AUDIO
R
to video/audio | to video/ |
audio | |
outputs | inputs |
VCR for playback | VCR for recording |
Getting Started