The CENTER adjustment screen automatically disappears after about 80 seconds if you do not press any button. You can also erase the CENTER adjustment screen by pressing MENU.

To reset to the factory preset setting

Press RESET on the monitor while the CENTER adjustment screen is displayed. For details, see page 26.

Notes

•You cannot use this function for the input from VIDEO 1/2/3 IN and COMPONENT IN.

•You can operate the menu using the ￿/￿/ı/￿and the ENTER buttons inside the drop-down panel on the front of the monitor.

Adjusting the picture size (SIZE)

MENUENTER

After projecting the picture from a computer, you may need to adjust the picture size to fit the monitor screen. The setting is only for the input signal displayed on the screen.

1

Press MENU.

 

MENU

2

Press vor Vto select “ (SIZE),” and press

 

ENTER.

 

S I Z E

 

ENTER

 

EX I T

3 Press Bor bto adjust the picture size.

b: to increase horizontal size

B: to decrease horizontal size

The SIZE adjustment screen automatically disappears after about 80 seconds if you do not press any button. You can also erase the SIZE adjustment screen by pressing MENU again.

To reset to the factory preset setting

Press RESET on the monitor while the SIZE adjustment screen is displayed. For details, see page 26.

Notes

• If a signal with resolution of 640 × 350, 640 × 400 or 720 × 400,

 

or Wide Resolution signal is input, the picture will be enlarged

 

to fill the screen but will appear lengthened vertically.

 

• You cannot use this function for the input from VIDEO 1/2/3

 

IN and COMPONENT IN.

 

GB

• You can operate the menu using the ￿/￿/ı/￿and the ENTER

buttons inside the drop-down panel on the front of the

 

monitor.

 

Operations 17-GB