Safety Information

Mains lead

Unplug the mains lead when moving the TV. Do not move

the set with the mains lead plugged in. It may damage the mains lead and result in fire or

electric shock. If the set has been dropped or damaged, have it checked immediately by qualified service personal.

Damage requiring service

If the surface of the display cracks, do not touch it until you have unplugged the mains lead. Otherwise electric shock may result.

Ventilation

Leave space around the TV set. Otherwise, adequate air- circulation may be blocked causing overheating which may cause fire or damage the TV set.

30 cm

 

10 cm

10 cm

 

Leave at least this

 

much space.

 

Air circulation

Never install the unit as follows:

is blocked

 

 

Wall

Medical institution

Do not place this TV set in a place where medical equipment is in use. It may cause malfunction of medical instruments.

Carrying

Before carrying the TV set, disconnect all the cables from the TV set.

Fluorescent lamp

This TV set uses a special fluorescent lamp as its light source. If the screen image becomes dark, flickers or does not appear, the fluorescent lamp has run down and should be replaced. For replacement, consult qualified service personnel.

Adjusting the viewing angle of the TV set

When adjusting the angle, hold the stand with your

hand so that it does not come loose or fall off.

Be careful not to catch your fingers between the TV set and the stand.

LCD screen

•Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue or green) may appear constantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction.

•Do not expose the LCD screen surface to the sun. Doing so may damage the screen surface.

•Do not push or scratch the front filter, or place objects on top of the TV set .The image may be uneven or the LCD panel may be damaged.

•If the TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises.

•Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments.

•The screen and cabinet get warm when the TV set is in use. This is not a malfunction

4 Safety Information