Removing the Rear Cover

When you connect the cables, remove the rear cover of the TV set. Be sure to attach the rear cover back on the TV set after you finish connecting the cables.

Removing the rear cover

Hold the rear cover as illustrated below and pull off one side of the lower part of the cover towards you first. Then, detach the upper part of the cover from the TV set. Repeat this operation on the other side of the cover.

GB

Attaching the rear cover

Hold the rear cover as illustrated below, fitting the four detents on the rear cover into the corresponding holes on the TV set, then push the rear cover back on to the TV set.

It is not necessary to attach the rear cover if you install a wall-mount bracket SU-LW1 (optional accessory).

Overview & Installation 13