Switching on the Projection TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to 1) choose the language of the menu screen, 2) search and stores all available channels (TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the screen.
However, if you need to change the language menu, change the country, change or repeat the tuning (e.g. when you move house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in
the 
(PRESET).
VIDEO TV
1 2 3
4 5 6
7 8 9
0
1 Connect the Projection TV plug to the mains socket
50 Hz). Press the 
on/off button on your projection TV set to switch on. The first time you press this button the Language menu displays automatically on the screen.
2 Push the joystick on the remote control to $ or 4 to select the language, then press OK to confirm your selection. From now on all the menus will appear in the selected language.
3 The Auto Tuning menu appears on the screen in the selected language, then press the OK button on the remote control to select YES.
4 A new menu appears automatically on the screen asking you to check that the aerial is connected. Confirm that the aerial is connected and then press the OK button to start the automatic tuning.
The TV starts to automatically search and store all available channels (TV Broadcast) for you and the message “Searching” flashes on the screen until all available channels will be stored. If any analogue channel is tuned, it will be stored in programme numbers 91 to 99 but only in the case that these positions are free. However, if you wish to tune in any analogue channel and store it in the programme number of your choice, please refer to the section "Manually Tuning the TV" of this instruction manual.
This procedure could take some minutes. Please, be patient and do not press any button. Otherwise the automatic tuning will
not be completed.
LANGUAGE |
|
English | LANGUAGE |
| |
Deutsch | English |
Français | Deutsch |
Français | |
Italiano | Italiano |
Nederlands | |
Nederlands | Polski |
Česki | |
Polski | Magyar |
Eλλnvιkά | |
Česki | Select Language: |
Magyar | Confirm: OK |
Eλλnvιkά |
|
Select Language:
Confirm: OK
LANGUAGE
English
Deutsch
Français
Italiano Nederlands Polski Česki Magyar
Eλλnvιkά
Select Language:
Confirm: OK
Do you want to start automatic tuning?
Yes
No
Confirm: OK
Please confirm that antenna is connected
Confirm: OK
AUTO PROGRAMME
PROG | SYS | CHAN | SERV | LABEL |
- - | DIG | C 26 | - - | - - - - - |
Searching
PROGR
MENU
continued...
RM 892
S
8 First Time Operation