Installing and Connecting the Projection TV
Connecting a Satellite Receiver
Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.
2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN jacks.
3 Connect a coaxial cable from your cable or antenna to the projection TV’s VHF/UHF jack.
✍If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
Installing and Connecting the
Rear of projection TV
VIDEO (yellow)
S
VIDEO
Coaxial cable
Satellite receiver
Satellite antenna cable
