Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the screen.
However, if you need to change the language menu, change or repeat the tuning (e.g. when you move house) or rearrange again the order of the channels afterwards, you can do that
by selecting the appropriate menu in the 
(Set Up). For more information, refer to the “Menu Guide” section of this instruction manual. You can also do that by pressing the
Auto Start Up Button 
on the TV set.
1 Connect the TV plug to the mains socket
The first time the TV set is connected, it is usually turned on. If the TV is off, press the 
on/off button on the TV set to turn on the TV.
The first time you press this button, a Language menu displays automatically on the TV screen.
2 Press the 
or 
button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language.
3 The Auto Tuning menu appears on the screen. Press the OK button to select Yes.
Language
English
Español
Français
Italiano
Magyar
Nederlands
Select Language: | OK |
Do you want to start automatic tuning?
Yes
No
OK
K
K
4 A new menu appears on the screen asking you to check that the aerial is connected. Ensure the aerial is connected and then press the OK button to start the automatic tuning.
The TV starts to automatically search and store all available channels (TV Broadcast) for you.
This procedure could take some minutes. Please be patient and do not press any button, otherwise the automatic tuning will not be completed.
Please confirm that aerial is connected
Confirm
OK
K
Auto Tuning
Programme:01
Channel:C21
Searching...
continued...
8First Time Operation