UHF aerial VHF aerial

Step 2 — Connecting the Aerial

Note

Do not use the supplied loop aerial with any other TV product.

Connecting an indoor aerial (KV- 14V5U, KV-14V6U only)

If your local VHF/UHF signal is strong, an indoor aerial can be used to obtain a clear picture. Connect the supplied loop aerial as follows:

1Insert the aerial until it clicks.

2Connect to the ù(aerial) socket.

After turning on the video TV, adjust the aerial for the best reception. Be sure to adjust the aerial for the channel you want to record as well. If reception is poor, connect an outdoor aerial to your video TV.

Aerial connector (supplied)

Connecting an outdoor aerial

For better TV reception and clearer recording, connect an outdoor aerial to your video TV.

To connect a VHF aerial or a combination VHF/UHF aerial—75-ohm coaxial cable (round)

Attach an IEC aerial connector to 75-ohm coaxial cable.

Plug the connector into the (aerial) socket, located at the rear of the video TV.

 

VHF/UHF aerial

Rear

On a wall

 

or

To connect both VHF and UHF aerials

Attach the aerial cable ends to the VHF/UHF mixer (not supplied). Plug the mixer into the (aerial) socket, located at the rear of the video TV.

Rear

300-ohm twin-lead cable

VHF/UHF mixer

75-ohm coaxial cable

After connecting the aerial, connect the mains lead to a wall outlet.

Getting Started 5