Switching On the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast), 3) change the order in which the channels (TV Broadcast) appear on the screen and 4) adjust the picture slant.

However, if you need to change any of these settings at a later date, you can do that by

selecting the appropriate option in the (Set Up) or (Channel Set Up) menu.

1 Connect the TV plug to the mains socket (220-240 V AC, 50 Hz). Press ! On/Off button on the TV set to switch on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen.

2 Press 2 +/– button on the top control panel to select the language, then press t to confirm your selection. From now on all menus will appear in the selected language.

Language

Svenska

Norsk

English

Nederlands

Français

Select language

Select [–2+] Confirm [t]

GB

3 Ensure the aerial is connected as instructed, then press t to confirm. The TV automatically starts searching and storing all available broadcast channels for you.

•This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed.

•If no channels were found during the auto tuning process, a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 6) and press t. The auto tuning process will start again.

Initial Set Up

First please connect aerial

Do you want to start automatic tuning?

Yes

No

Select [–2+] Confirm [t]

Auto Tuning

No channel found

Please connect aerial

OK

Confirm [t] End [MENU]

continued...

First Time Operation 7