Level 1

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Level 2

Set Up

Language/Country

Auto Tuning

Programme Sorting

Manual Programme Preset

Advanced Features

OK

Manual Programme Preset

Programme:01

System:B/G

Channel:C 21

Label:--TVE

AFT:On

Skip:No

Decoder:Off

Confirm

OK

Level 3 / Function

3After selecting the Channel option, press . Then press or to select the channel tuning (“C” for terrestrial channels or “S” for

cable channels). Next press . After that, press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not

know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store.

Repeat all the above steps to tune and store more channels.

b)Normally the automatic fine tuning (AFT) is operating, however you can manually fine tune the TV to obtain a better picture reception in the case that the picture is distorted.

To do that: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. Finally press OK twice to store.

c)Skip any unwanted programme numbers when they are selected with the PROGR +/- buttons.

To do that: Highlighting the Programme option, press the PROGR +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . Next press or to select Yes. Finally press OK twice to confirm and store.

To cancel this function afterwards, select “No” instead of “Yes” in the step above.

d)Label a channel using up to five characters.

To do that: Highlighting the Programme option, press the PROGR +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next

press or to select a letter, number or “-“ for a blank. Press to confirm this character. Select the other four characters in the same way. After selecting all the characters, press OK twice to store.

continued...

12Menu System