PAP (PICTURE AND PICTURE)
PAP divides the screen into two to watch two pictures in format 4:3 simultaneously.
1 2 3
4 5 6
7 8 9
0
PROG
Switching PAP on and off
1Press 
to display PAP.
03
One of the screens will be framed to indicate that this is
the active screen. It means that when you want to selectNavegador
Configuración del Sistema
the PAP source, you will be doing it in the active screen.
2 Press | again to remove PAP. |
| Aceptar | Versión |
Select: PROG+ PROG | Move Frame | Select: |
On the screen a banner appears guiding you on how to operate PAP. This banner will disappear after some seconds but it can
always be displayed again by pressing the 
button.
GB
Changing the active screen
This is only possible if the Media Selector is set to TV.
To change the active screen (framed), press the B or bbuttons.
Selecting PAP source
1Selecting a TV channel:
Press the Bbutton to select the left screen as the active screen. Next press the number buttons or PROG +/- to select a TV channel.
Video input signals can not be displayed on the left screen.
2Selecting an input source:
Press the bbutton to select the right screen as the active screen. Next press repeatedly the 
button to show the input signal of the connected equipment on right screen of the TV. For more details on which input symbol you wish to choose, please see section "Viewing pictures from equipment connected to the TV" on page 23.
RF signal (TV broadcast channels) can not be displayed on the right screen.
Selecting the sound
The sound of the active screen (framed) always comes from the TV speakers.
Besides that, you can listen to the active screen as well as the non active screen via headphones.
To do this:
With the PAP switched on, refer to the section "The Sound Adjustment Menu", select "Headphones Set Up" and set the option " 
PAP Sound" according your preference. For details see page 13.
In PAP (picture and picture) mode, the output from the Scart 
2/
2 is fixed to the right picture.
TV Functions 19