Additional Equipment

Additional information when connecting equipment

*If the picture or sound is distorted, move the VCR away from the TV set.

*When connecting a monaural VCR, connect only the white jack to both the TV set and the VCR.

*

For information on how to select the output signal of the scart 2

2 /

 

s 2 , see page 14.

 

*When connecting external hi-fi equipment, you can adjust the volume level by adjusting the headphones setting in the sound menu - please refer to the ‘Adjusting the picture and sound’ section of this manual.

Smartlink

Smartlink is a direct link between your TV and VCR.

For Smartlink you need:

*A VCR which supports Smartlink, NexTView Link, Easy Link or Megalogic.

*A fully-wired 21-pin scart cable to connect your VCR to scart 2 2 / s 2 connector.

The features of Smartlink are:

*Tuning information such as the channel overview are downloaded from the TV set to the VCR.

*With NexTView you can programme your VCR easily.

*Direct TV recording: while watching TV you need to press just one button on the VCR to record this programme.

For more information on Smartlink please refer to your VCR instruction manual.

Remote control of other Sony equipment

Using the buttons underneath the cover of the remote control you can control other Sony equipment.

1.Open the cover of the remote control.

2.Set the selector VTR 1234 DVD according to the equipment you want to control: VTR1 Beta VCR

VTR2 8mm VCR VTR3 VHS VCR

VTR4 Digital Video (DCR-VX 1000/9000E,VHR-1000) DVD Digital Video Disk

3.Use the buttons on the remote control to operate the equipment.

*If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the TV remote control.

*If the equipment does not have a certain function, the corresponding button on the remote control does not work.

21