32FQ80 B5 Part 5.fm Page 17 Thursday, July 11, 2002 4:43 PM

Features menu

This menu allows you to set the sleep timer and to set a signal to be output from the AV3 socket. The table below explains each option and how to use it:

Auto Format

 

 

 

 

With this option switched on, the TV can automatically adjust

Press V or v to select ‘On’ or ‘Off’.

the picture size to suit the broadcast.

Press OK to confirm.

 

 

 

 

 

 

 

Format Correction*

 

 

 

Press V or v to select ‘On’ or ‘Off’.

(*only if ‘Auto Format’ is switched on)

Press OK to confirm.

When viewing 4:3 or 14:9 broadcasts there will be dark areas

 

visible at the edge of the screen. The settings available are:

 

Off: Dark areas remain on the TV screen.

 

On: The TV automatically switches to Smart mode, eliminating

 

any dark areas on the TV screen.

 

 

 

 

 

 

 

 

Sleep Timer

 

 

 

 

This option allows you to set a period of time after which the TV

Press V or v to select the period of time

switches itself into standby mode. This can be in 10 minute

required. Press OK to confirm.

intervals up to a maximum of 90 minutes.

 

 

 

 

 

 

 

 

AV3 Output

 

 

 

 

This option allows you to set which signal source is output from

Press V or v to select TV, AV1, AV2,

the AV3 scart socket (labelled

3/

 

s 3 ) on the rear of the

AV3, AV4 or AV5. Press OK to confirm.

 

TV. If you connect a VCR to this socket you can record from

 

equipment connected to the other sockets of the TV. The

 

settings available are:

 

 

 

 

TV: Outputs the TV signal.

 

 

 

 

AV1: Outputs the signal from equipment connected to the

 

 

 

1 socket on the rear of the TV.

 

 

 

 

AV2: Outputs the signal from equipment connected to the

 

 

 

2 socket on the rear of the TV.

 

 

 

 

AV3: Outputs the signal from equipment connected to the

 

 

 

3/ s 3 socket on the rear of the TV.

 

AV4: Outputs the signal from equipment connected to the

 

 

 

4/ s 4 socket on the rear of the TV.

 

AV5: Outputs the signal from equipment connected to the

 

 

 

5/ s 5 socket on the front of the TV.

 

 

 

 

 

 

 

 

Set Up menu

This menu contains advanced features that allow you to customise the TV. The options are:

Auto Tuning

All the available channels were tuned in when the TV was first installed. The ‘Auto Tuning’ option in the ‘Set Up’ menu allows you to repeat that process (e.g. to re-install the TV at an alternative location or search for new channels that have been launched by broadcasters). With the ‘Auto Tuning’ option highlighted, press b to select. The autotune prompt appears on screen. Press OK to start the auto tuning process. When all available channels have been tuned the TV returns to normal operation.

Programme Sorting

The ‘Programme Sorting’ option in the ‘Set Up’ menu allows you to change the order in which the channels are stored on the TV. With the ‘Programme Sorting’ option highlighted, press b to enter the ‘Programme Sorting’ menu. Press v or V to highlight the channel you wish to move to a new position, then press b to select. Press v or V to highlight the new position for your channel, then press OK. Your chosen channel has now moved to the new position. Repeat to move other channels if required.

Select NexTView

With the ‘Select NexTView’ option highlighted, press b to enter the ‘Select NexTView’ menu. Refer to ‘NexTView Electronic Programme Guide (EPG)’ for details.

AV Preset

The ‘AV Preset’ option in the ‘Set Up’ menu allows you to assign a name to any equipment connected to the AV sockets of the TV. The name is displayed briefly on screen when the equipment is selected. With the ‘AV Preset’ option highlighted, press b to enter the ‘AV Preset’ menu. Press v or V to highlight the socket you wish to name. Press b to select the AUTO FORMAT column. Press

vor V to select ‘Off’ or ‘On’. (For more details on Auto Format’, refer to ‘Features menu’). Press b to select the LABEL column. Press v or V to select the first character. Press b to confirm this character. Select the other characters in the same way (up to a maximum of five characters). After selecting all required characters, press OK to store.

Manual Set Up

With the ‘Manual Set Up’ option highlighted, press b to enter the ‘Manual Set Up’ menu. The ‘Manual Set Up’ menu is explained on the following page.

Advanced Operation 17