Sony KV-AZ21 channels, Then press, using PROG +, . Then press, slanted, then press, press V or v to select, select “On”. Then press, To block unwanted program number

Setting up your TV (“Initial Setup”) (continued)d)If you wish to edit the channels, press to change to edit mode.Press b until the mode that you wish to editis highlighted: Label, Skip, (block symbol). Then press .

1)	To label, press V or v to select the
	alphanumeric characters for the label.		Confirm	Exit
	Then press .	Select
2)	To skip the program number, press V or v to
	select “On”. Then press .
	You can skip this program number when
	using PROG +/-.	Select	Confirm	Exit
3)	To block unwanted program number,
	press V or v to select	. Then press .
e) Repeat step b) to d) if you wish to change other
channels.		Select	Confirm	Exit

Press WEGA GATE to go to the next menu.

4	Press B or b to adjust the bars on the top
	and bottom of the menu if they are
	slanted, then press .
	Select Confirm End
	If no adjustment is necessary, then press .

5 To prevent this “Initial Setup” menu from appearing again when you turn on the TV by pressing !, press V or v to select “No”, then press .

To allow this menu to appear again, select “Yes”, then press .

Select Confirm

Tip

• You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.

6