Sony KV-HA14, KV-HA21 CSecuring the TV, WARNING (continued), band, Note, 20 mm, screws, 3.8 mm, clamps, BKV-HA21only

	Do not plug in too many appliances to the same
Do not place any objects on the TV.	power socket. Do not damage the power cord.

	Pull the power cord out by the plug. Do not pull
	the power cord itself. Even if your TV is turned
Install the TV on a stable TV stand and floor which	off, it is still connected to the AC power source
can support the TV set weight. Ensure that the TV	(mains) as long as the power cord is plugged in.
stand surface is flat and its area is larger than the	Unplug the TV before moving it or if you are not
bottom area of the TV.	going to use it for several days.

To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.

screws	3.8 mm	band
	clamps

Screw the band to the TV stand and to the provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.

(2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV.

Note

• Use only the supplied screws. Use of other screws may damage the TV.