xSecuring the TV
To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. Use only the supplied screws. Use of other screws may damage the TV.
| 20 mm |
|
| screws | 3.8 mm |
|
| clamps | band |
or
Screw the band to the TV stand and to the provided hole at the rear of your TV.
(1)Put a cord or chain through the clamps.
(2)Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV.
xGetting Started
Step 1Insert the batteries (supplied) into the remote.
b
Note•Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.
Tips•Your TV can receive both TV and FM radio signal from the appropriate connections through the 8 (antenna input) terminal
•You can also connect your TV to other optional components (see page 9).
b
Step 3
Plug in the power cord, then press ! on the TV to turn it on.
Note
•The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction.
Step 4
Set up the TV by following the instructions of the
“Начальная настройкa” (“Initial Setup”) menu (see page 5).
4