K“Picture” setting
Press WEGA GATE and select “Settings”. Make sure the “Picture” icon () is selected, then press .
Picture
| Picture Mode: | Vivid | |
| Picture Adjustment |
|
|
| Color Temperature: | Cool |
|
| VM: | High |
|
| Intelligent Picture: | On |
|
| Signal Level Indicator: | On | |
Select | Confirm | End |
|
“Picture Mode” | Choose either “Vivid” (bright, contrast and sharp), | ||||
| “Standard” (normal) or “Custom”*. | ||||
|
|
|
|
|
|
“Color Temperature” | Adjust white color tint. |
|
| ||
| Choose either “Cool” (blue tint), “Neutral” (neutral tint) or | ||||
| “Warm” (red tint). |
|
| ||
|
|
|
|
| |
“VM” | Sharpen the edges of each object. |
| |||
(Velocity Modulation) | Choose either “High”, “Low” or “Off”. | ||||
|
|
|
|
|
|
“Intelligent Picture” | Optimize picture quality. |
|
| ||
| Press V or v to select “On”, then press . | ||||
| To cancel, select “Off”, then press . | ||||
|
|
|
| ||
“Signal Level Indicator” | Display the signal level when the “Intelligent Picture” is | ||||
| functioning. |
|
| ||
| “Intelligent Picture Signal Level” indicator will be displayed, | ||||
| followed by picture improvement when you change the | ||||
| program number or the input mode. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
| red | amber | green |
| |
| (weak) | (average)(fair ................. | good) | ||
| Press V or v to select “On”, then press . | ||||
| To cancel, select “Off”, then press | . “Intelligent Picture” is | |||
| still functioning. |
|
| ||
|
|
|
|
|
|
*You can adjust the setting to your personal preference in the “Picture Adjustment”, “Color Temperature” and “VM” options only when the “Custom” mode is selected.