To change the color system setting

If the color is abnormal when receiving programs through the 8 (antenna input) terminal or the t(video input) jack.

(1) Press SELECT until “COLOR SYS” appears.

COLOR SYS: AUTO

Using

(2)Press + or – to select the appropriate color system until the color is optimal.

Tip

• Normally set “COLOR SYS” to “AUTO”.

AUTO PAL SECAM

NTSC 4.43

 

NTSC 3.58

 

New Your TV

Skipping program numbers

1

Press PROGR +/– or the number buttons until the unused or unwanted

 

program number appears.

 

 

2

Press SELECT until “MANUAL PROGRAM” appears.

3

Press + or – to enter the “MANUAL PROGRAM” mode.

4

Press PIC MODE.

5

Press SELECT to exit the “MANUAL PROGRAM“ mode.

To restore the skipped program number again

Preset the channel automatically or manually.

Tip

You can also use SELECT and 2 +/– on the TV to preset channels and skip program numbers.

To use the fine tuning (FINE) function

The fine tuning (FINE) function may help to reduce the following problems: double images and lines moving across the TV screen.

You can use the fine tuning function as below:

(1)Select the program number you want to adjust.

(2)Press SELECT until “MANUAL PROGRAM” appears on the screen.

(3)Press + or – on the remote control once.

(4)Press to display “FINE” on the screen.

(5)Press + or – continuously until the above problems are minimized. The + or – icon on the screen flashes while tuning.

(6)Press SELECT to return to normal screen.

Using Your New TV 11