Operating Instructions
Connecting Additional Equipment
TV and VCR
Rear of TV
2
VCR
Coxial
Cable
1
From cable/ antenna
3(Optional connection)
1Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.
2Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
✍To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR).
(Optional connection)3 If your VCR is equipped with video outputs, you can get better picture quality by connecting A/V cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
✍You can use the 
button to switch between the VHF/UHF and VIDEO inputs.
✍For optimum picture quality, use S VIDEO (if your VCR is equipped with the S VIDEO connection) instead of the yellow A/V cable. S VIDEO does not provide sound, the audio cables must still be connected.
4