*If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
Note:
•To view input from the DBS or VCR, select the video input which your DBS receiver or VCR is connected to by pressing TV/VIDEO on the remote control.
Connecting a camcorder
Use this connection to view a picture directly from your camcorder.
1Using an AUDIO/VIDEO cable, connect AUDIO and VIDEO OUT on the camcorder to AUDIO and VIDEO IN on the lower left side on the front of the projection TV
2Press VIDEO 2 to select the video inputs from a camcorder.
Notes:
•If you are connecting a monaural camcorder, connect only the single audio output to the left (MONO) input on the projection TV.
•If you have an S Video equipped camcorder, you can use an S Video connection.
Disconnect all power sources before making any connections.
(Front of projection TV)
2 | PUSH | VIDEO |
VIDEO 2 | ||
S VIDEO |
| |
|
|
VIDEO
L(MONO)
R
AUDIO
Camcorder Audio/video (not supplied) outputs
13