Using Digital TV Features

Watching Digital TV

Many digital TV features can be accessed directly through the remote control. The following chart will explain the function of some buttons found on your remote control.

REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART

To use the remote control for digital TV programs

First, press DTV ANT on the remote control so that the TV FUNCTION indicator on the remote control lights up in green momentarily.

The remote control functions for digital TV programs.

At the same time the DTV indicator on the front of the projection TV lights up in green.

DTV ANT

Lights up in

TV green.

FUNCTION

Make sure that the TV FUNCTION indicator lights up in green each time you press the buttons marked with an asterisk (*) that are listed in the tables.

Using the White Labeled Buttons for Projection TV Operations

TV (FUNCTION)

 

Activates the remote control for use with the projection TV.

 

 

 

 

 

p DTV ANT*

 

Activates the remote control for use with digital TV programs.

 

 

 

 

 

TV POWER

 

Turns the projection TV on and off. If a video input indication (e.g. VIDEO 1,

 

 

 

VIDEO 2) appears on the screen, press TV/VIDEO until a channel number

 

 

 

appears.

 

 

 

 

 

0 - 9 *,

*

Use for direct digital channel selection. Digital channels are indicated by the

 

and ENTER*

 

use of a dot in the channel number. For example, to select subchannel 3 in

 

 

main channel 10 (channel number 10.3), press 1, 0, • (dot), 3 and ENTER.

 

 

 

 

 

GUIDE*

 

Press to display the Program Guide. (see “Using Program Guide to Select

 

 

 

Subchannels” on page 31)

 

 

 

 

 

CH +/–*

 

Press to scan through the channels (+ up or – down).

 

 

 

 

 

VOL +/–

 

Press to adjust the volume (+ up or – down).

 

 

 

 

 

JUMP*

 

Press to alternate or jump back and forth between two digital channels. The

 

 

 

projection TV will jump between the current channel and the last channel

 

 

 

selected using the 0–9 and • (dot) buttons, CH+/– buttons or Program Guide.

 

 

 

 

 

(continued)

28