Using the Setup Menu

Channel Setup Auto Program

Caption Vision DTV Auto Add

VTR Recording Name and Logo

Language Skip/Add

Time Zone

For detailed information on using the remote control to modify menu settings, refer to “Learning Setup Menu Selection” on page 32.

Channel Setup

Basic channel and

display options

Auto Program: Select to scan and preset digital channels automatically. Before “Auto Program” process, a dialog box pops up with the message “Are you sure you want to clear your existing channel list?” Move the joystick left or right to

select OK, and press to activate “Auto Program.” A tuning indicator appears and the projection TV starts scanning and presetting digital channels automatically. When all the receivable channels are stored, the lowest channel is displayed and the tuning indicator disappears.

Note:

•If you currently have a list of programmed channels, or “Name and Logo” or “Skip/Add” setting, they will be erased when you perform “Auto Program.”

DTV Auto Add: Select to preset additional digital channels as they become available without erasing original channels (after you use Auto Program). During the “DTV Auto Add” process, a tuning indicator appears and the projection TV starts scanning and adding new digital channels. When scanning is complete, the indicator disappears and the current channel re-appears.

Note:

• If there are no DTV channels saved in

channel memory (no DTV channels found

during “Auto Program” or “DTV Auto

Add”), the “Name & Logo” and “Skip/

Name and Logo: Select to add or change the station name and logo.

When selected, a dialog box pops up.

1Press CH +/– to select the desired channel.

2Move the joystick left or right to select the station name and the corresponding logo.

3Move the joystick up or down—and then left or right—

to select OK, and press .

Dialog box

Name and Logo

Channel 30

FOX

FOX

 

 

 

 

 

Press CH+/– to change channels.

Press “”to toggle Name/Logo.

OK Cancel

Add” features in the Setup Menu cannot

be accessed.

To clear the dialog box without changing the name and logo for the current channel, move the joystick up or down—and then left or right—to select “Cancel,” and press .

(continued)

33