Sony Recording a CD, 6 DOLBY NR 3 2 4 p, — CD Synchro Recording, Do this, Operations Basic

To	Do this
Stop playback	Press p.
Pause	Press P. Press again to resume
	playback.
Select a track	During playback or pause, turn
	the jog dial clockwise (to go
	forward) or counterclockwise (to
	go backward) and release it when
	you reach the desired track.
	Or press AMS* + (to go
	forward) or AMS* =(to go
	backward) on the remote.

Find a point in Press and hold )or 0during

a track	playback, and release at the
	desired point.
Select a CD	Press one of the DIRECT PLAY
	buttons.
	Or press DISC SKIP (or press
	D.SKIP on the remote).
Play only the	Press 1/ALL DISCS repeatedly
CD you have	until “1 DISC” appears.
selected
Play all CDs	Press 1/ALL DISCS repeatedly
	until “ALL DISCS” appears.
Remove or	Press 6 OPEN.
change the
CDs
Adjust the	Turn VOLUME (or press
volume	VOLUME +/– on the remote).

* AMS: Automatic Music Sensor.

Tips

•Pressing ·while the system is off automatically turns on the system and starts CD playback if there is a CD on the tray (One Touch Play).

•You can switch from another source to the CD player and start playing a CD just by pressing · or one of the DIRECT PLAY buttons (Automatic Source Selection).

•If there is no CD in the player, “NO DISC” appears in the display.

•You can change the CD in the loading position during playback.

Recording a CD

— CD Synchro Recording

This function lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically.

1/u	7 p ª 5
(Power) DSP

6 DOLBY NR 3 2 4 p 1

1 Press 6EJECT and insert a blank tape into deck B.

With the side you want to record on facing forward

ª ª ª ª

2 Press 6OPEN and place a CD.

With the label
side up.	ª ª	ª	ª
When you play
a CD single,		ª
place it on the
inner circle of
the tray.

continued

Operations Basic

15