Step 2: Setting up the speakers (continued)
Adjusting the speaker volume
To enjoy Dolby Pro Logic Surround sound, adjust the volume of each speaker using the test tone that the system provides.
1/u 1
(Power)VOLUME
1 Press PRO LOGIC.
The indicator above this button lights up.
2 Press T. TONE on the remote.
The test tone is heard from the speakers in the following order. Adjust the volume of the test tone.
nFront (left) nCenter Rear NFront (right) N
3 From your listening position, press CENTER LEVEL +/– and REAR LEVEL +/– on the remote to adjust the volume levels.
The volume levels from each speaker should be the same.
4 Press T. TONE when you are done adjusting.
The test tone is turned off.
Tip
If you turn VOLUME (or press VOL +/– on the remote), all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic Surround sound.
3
1
2,4
VOL +/–
8