Step 4: Presetting radio stations

You can preset the following number of stations:

—2 band model: 20 for FM and 10 for AM

—3 band model:

20 for FM, 10 for AM, and 5 for UKV

The bands you can select depend on the kind of tuner built into your system. Confirm the bands by pressing TUNER/BAND repeatedly.

1/u

4 2 5 1 3

(Power)

1 Press TUNER/BAND repeatedly until the desired band appears in the display.

Each time you press this button, the band changes as follows:

2 band model: FM ÷AM

3 band model:

FM nAM nUKV* n

* When you select this band, “STEREO PLUS” appears in the display.

2 Press TUNING MODE repeatedly until “AUTO” appears in the display.

3 Press TUNING +/–.

The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear.

4 Press TUNER MEMORY.

The next available preset number flashes in the display. The stations are stored from preset number 1.

5 Press ENTER/NEXT.

The station is stored.

6 Repeat steps 1 through 5 to store other stations.

To tune in a station with a weak signal

Press TUNING MODE repeatedly until “MANUAL” appears in step 2, then press TUNING +/– to tune in a station.

To store another station on an existing preset number

Start over from step 1. After step 4, press TUNING +/– to select the preset number on which you want to store the station.

You can add a new preset number after the last preset number.

10