Sony LMD-1751W manual Specifications, Dimensions

SPECIFICATIONS

Picture Performance
Type		a-Si TFT Active Matrix LCD
Resolution (pixels)		1280 x 768
Picture Size (H x W)		Approx. 369.6 x 221.8 mm
(Viewable area)		(Approx. 14 5/8 x 8 3/4 inches)
(Diagonal)		Approx. 431.1 mm (17 inches)
Aspect		15:9
Colors		Approx 16,770,000 colors
Viewing Angle		85°/85°/85°/85°
		(typical) (up/down/left/right contrast>10:1)
Input
Standard	Composite	BNC (x1), 1.0 Vp-p ±3dB sync negative
	Y/C	Mini DIN 4-pin (x1)
		Y: 1.0 Vp-p ± 3dB sync negative,
		C: 0.286 Vp-p ± 3dB (NTSC burst signal level),
		0.3 Vp-p ± 3dB (PAL burst signal level)
	RGB, Component	BNC (x3)
		RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)
		Component : 0.7 Vp-p ± 3dB
		(75% chrominance standard color bar signal)
	External Sync	BNC (x1)
		0.3 to 4.0 Vp-p ± bipolarity ternary or negative polarity binary
	Audio	Phono jack (x2) (L, R) -5 dBu 47 kilo ohms or higher
	HD15	D-sub 15-pin (x1),
		R/G/B: 0.7 Vp-p sync positive
		(Sync On Green, 0.3 Vp-p sync negative)
		Sync :Total level
		(polarity free, H/V separate and composite sync)
		Plug & Play function : corresponds to DDC-2B
	DVI-D	TMDS single link
	Parallel remote	Modular connector 8-pin (x1)
		(pin assignment at users’ allocation)
	Serial remote (LAN)	D-sub 9-pin (RS-232C) (x1),
		RJ-45 modular connector (ETHERNET) (x1)
		(10BASE-T/100BASE-TX)
	DC in	XLR type 4-pin (x1) DC 12 V
		(output impedance 0.05 ohms or less)
Optional	Option input slot	2 slots (for HD-SDI, SDI capability and extra analog I/O’s)
Output
Standard	Composite	BNC (x1), Loop-through, with 75 ohms automatic termination
	Y/C	Mini DIN 4-pin (x1) Loop-through,
		with 75 ohms automatic termination
	RGB, Component	BNC (x3), Loop-through,
		with with 75 ohms automatic termination
	External Sync	BNC (x1), Loop-through, with 75 ohms automatic termination
	Audo monitor out	Phono jack (x2) (L, R)
	Speaker (Built-in)	1 W + 1 W (stereo)
General
Power Requirement		AC 100 V to 240 V 50/60 Hz 0.8A to 0.4 A, DC 12 V, 5.7 A
Power Consumptio		Maximum Approx. 77 W (with 2 x BKM-229X)
Operating Temperature		0°C to 35°C (32°F to 95°F)
Recommended Operation Temperature		20°C to 30°C (68°F to 86°F)
Operating Humidity		30% to 85% (No condensation)
Storage & Transport Temperature		-20°C to +60°C (-4°F to +140°F)
Storage & Transport Humidity		0% to 90%
Operating/Storage/Trans. Pressure		700 hPa to 1060 hPa
Dimensions (W x H x D)
	without stand	439.5 x 284 x 105.0 mm (17 3/8 x 11 1/4 x 4 1/4 inches)
	with optional stand	439.5 x 385.7 x 269.9 mm (12 5/8 x 14 3/8 x 10 3/4 inches)
Display Stand (W x H x D)
	SU-561(Option)	320.0 x 364.0 x 269.9 mm (12 5/8 x 14 3/8 x 10 3/4 inches)
Mass	without stand and board	Approx. 6.3 kg ( 13 lb 14 oz)
	with optional stand and	Approx. 8.8 kg ( 19 lb 6 oz) with BKM-229X (x2)
	boards
Supplied Accessories		AC power cord (1), AC plug holder (1),
		Operating Instructions (1), CD-ROM (1),
		Using the CD-ROM Manual (1), Warranty book (1)

OPTIONAL Accessories

BKM-250TG	BKM-244CC	BKM-243HS
3G/HD/SD-SDI	HD/SD-SDI Closed	HD/SD-SDI Input Adaptor
Input Adaptor	Caption Adaptor

BKM-229X	BKM-227W	BKM-220D
Analog Component	NTSC/PAL Input Adaptor	SD-SDI 4:2:2 Input Adaptor
Adaptor

MB-530SU-561

Mounting Bracket Monitor Stand

DIMENSIONS
				5°*	10°*
	439.5 (17 3/8)			105.0 (4 1/4)	*Tilt angle
	/4)			/4)
	1		/4)	1
	(11			(11	/8)
			1
	284.0		385.7 (15	284.0	3
					364.0 (14
	100.0 (4)			269.9 (10 3/4)
	75.0 (3)			With optional SU-561
		)		Monitor Stand
		/32
		29		100.0 (4)
	/4)	(	75.0 (3)
	1
100.0(4)	54.1(2	22.8	64.4	/8)
				5
				(2
				Unit: mm (inches)

Distributed by

©2009 Sony Corporation. All rights reserved. Reproduction in whole or in part without permission is prohibited.

Features and specifications are subject to change without notice. All non-metric weights and measurements are approximate.

Images on monitors are simulated. Sony, ChromaTRU and LUMA are trademarks of Sony Corporation.

All other trademarks are the property of their respective owners.

MK10641V1IW09NOV