3-289-424-12(1)

Stereo Headphones

Operating Instructions
Manual de instrucciones

MDR-AS20J

© 2008 Sony Corporation Printed in Thailand

Cord slider

A

b

B

English
Features

•Lightweight clip-on style headphones for active use

•Unique loop hangers provide secure fit around the ear to prevent dropping during sports or workout activity

•Water-resistant design

How to use (see fig. A)

1 Hook the L part to your left ear and the R part to your right ear as illustrated.

2 Adjust the earpieces to comfortably fit your ears.

After you use the headphones, keep them with the cord slider high positioned to avoid entangling the cord.

How to re-attach the cord to the clip (see fig. B)

1 Hold the clip closed, and pull up the lever on the clip just a little. 2 Put the cord into the groove under the lever.

Notes

•If you pull up the lever on the clip without holding the clip closed, or holding the clip closed but opening the lever too much, you cannot put the cord into the groove under the lever.

•Do not catch the cord on the projection of the clip or do not wedge it into the groove. It may damage the wires of the cord.

Specifications

Type: Open air, dynamic / Driver unit: 13.5 mm, dome type / Power

handling capacity: 50 mW (IEC*) / Impedance: 16 Ω at 1 kHz / Sensitivity:

104 dB/mW / Frequency response: 18 - 22,000 Hz / Cord: Approx. 1.22 m

(48 1/8 in) / Plug: Stereo mini plug / Mass: Approx. 12 g (0.43 oz) without

cord / Supplied accessory: Clip (1)

* IEC = International Electrotechnical Commmission

Design and specifications are subject to change without notice.

Precautions

•Listening with headphones at high volume may affect your hearing. For traffic safety, do not use while driving or cycling.

•Do not put weight or pressure on the headphones as it may cause the headphones to deform during long storage.