Notes on MDs

Since the disc itself is housed in a cartridge, free from accidental contact with your fingers and dust, MDs can withstand a certain degree of the rough handling. However, dirt or dust on the surface of the cartridge or a warped cartridge may cause a malfunction. Observe the following for best results.

Never touch the surface of the disc itself by deliberately opening the shutter on the cartridge.

When you eject the MD, the shutter may be open. In such a case, close the shutter immediately.

Do not expose the MD to direct sunlight or heat sources such as hot air-ducts. Do not leave it in a car parked in direct sunlight where there can a considerable rise in temperature.

Make sure the MD is not left on the dashboard or rear tray of a car, etc. where the temperature can also be excessive.

Notes on attaching labels

Be sure to attach labels on cartridges correctly, as failing to do so may cause the MD to become stuck in the unit.

•Attach the label in a suitable position. •Remove old labels before putting new ones

on.

•Replace labels that are beginning to peel away from the MD.

Cleaning

Wipe the surface of the cartridge from time to time with a soft dry cloth.

3