Sony MDX-C670 Muting the sound, Changing the sound and display settings, Adjusting the sound characteristics, 1 Press (SHIFT), 4 Press (SHIFT), desired setting mode appears

If you need to mount the rotary remote on the right side of the steering column, you can reverse the controls operative direction.

Press (SOUND) two seconds while pushing the VOL control.

Tip

You can control the operative direction of controls with the unit.

You can adjust bass, treble, balance and fader. Each source can store the bass and treble levels respectively.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nBAS (bass) nTRE (treble) nBAL (balance) nFAD (fader)

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selecting the item. (After three seconds, the dial functions as the volume control.)

Press (MUTE) on the rotary remote. “Mute on” flashes momentarily.

To restore the previous volume level, press (MUTE) again.

Tip

The unit decreases the volume automatically when a telephone call comes in (Telephone-mute function).

You can set:

•Clock (page 5)

•D.Info (Dual Information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•Amber/Green to change the illumination color to amber or green.

•Dimmer to change the brightness of the display.

—Select “Auto” to dim the display only when you turn the lights on.

—Select “on” to dim the display.

•Contrast to adjust the contrast if the indications in the display are not recognizable because of the unit's installed position.

•Beep to turn on or off the beeps.

•RM (Rotary Remote) to change the operative

	direction of the controls of the rotary remote.	EN
	— Select “norm” to use the rotary remote as	Other
	the factory preset position.	Other
	the factory preset position.
	— Select “rev” when you mount the rotary
	remote on the right of the steering	Functions
	column.	Functions
	column.
	• Loud (Loudness) to enjoy bass and treble
	even at low volume. Bass and treble will be
	reinforced.
	• A. Scrl (Auto Scroll) (page 6 and 12)
	• Disc MEMO/TEXT name (Disc memo/CD-
	TEXT name) (page 14)
	1 Press (SHIFT).
	2 Press (2) (SET UP) repeatedly until the
	desired setting mode appears.
	Each time you press (2) (SET UP), the item
	changes as follows:
	Clock nD.Info* nAmber/Green nDimmer

nContrast nBeep nRM nLoud nA.Scrl

nDisc MEMO/TEXT name

*When you have not tune the station or there is no CD/MD being played, these items will not appear.

Note

The displayed item will differ depending on the source.

3 Press (4) (n) to select the desired setting (for example: on or off).

At “Contrast” setting, pressing (4) (n) makes the contrast higher, and pressing (1) (N) makes the contrast lower.

4 Press (SHIFT).

When the mode setting is complete, the normal playback mode appears.