Storing the station names

—Station Memo

You can assign a name to each radio station and store it in memory. The name of the current station appears in the display. You can store up to eight characters for each station.

Storing the station names
1 Tune in a station whose name you want to store.
2 Press (LIST) for two seconds. FM1

SUR EQ

￿ ________

3 Enter the characters.
1Rotate the dial clockwise direction to
select the desired characters.
(A nB nC n··· Z n0 n1 n2 n
··· 9 n+ nn* n/ n\ n> n< n. n_ )

FM1

￿ W_______

SUR EQ

If you rotate the dial counterclockwise, the characters appear in the reverse order.

If you want to put a blank space between characters, select “_” (under- bar).

2Press (4) (n) after locating the desired character.

The flashing cursor moves to the next space.

FM1

￿ W_______

SUR EQ

If you press (1) (N), the flashing cursor moves to the left.

3Repeat steps 1 and 2 to enter the entire name.
4 To return to normal radio reception, press (LIST) for two seconds.

Tip

To erase/correct a name, enter “_” (under-bar) for each character.

Displaying the station name
Press (DSPL) during radio reception.

FM1

￿3 WRKISS

SUR EQ

Each time you press (DSPL), the item changes as follows:

z Station name* z Frequency z Clock

*If the station name is not stored, “NO Name” appears in the display for one second.

Erasing the station name
1 Tune in any station and press (LIST) for two seconds.

2

Press (DSPL) for two seconds.

 

 

“Delete” and the station name appear in the

 

 

display.

 

3

Rotate the dial to select the name you

 

EN

4

want to erase.

Radio

Press (5) (ENTER) for two seconds.

 

The name is erased.

 

 

Repeat steps 3 and 4 if you want to erase

 

 

other names.

 

5

Press (LIST) for two seconds.

 

 

The unit returns to normal radio reception

 

 

mode.

 

Locating a station by

name List-up
1 Press (LIST) momentarily.

The name assigned to the current station appears in the display.

LST

￿3 WRKISS

SUR EQ

 

ENTER

2 Press (LIST) repeatedly until you find the desired station.
3 Press (5) (ENTER) to tune in the desired station.

Note

After the station name or frequency has been displayed for five seconds, the display goes back to normal mode. To turn off the display, press (DSPL).

9