Sony MHC-BX2, MHC-DX2 Step 3: Presetting radio stations (continued), To tune in a station with a weak signal, To set another station to an existing preset number

Step 3: Presetting radio stations (continued)

1 Press TUNER/BAND repeatedly to select FM or AM.

2 Press and hold + or – (or TUNING +/– on the remote) until the frequency indication starts to change, then release.

Scanning stops automatically when a station is tuned in. “TUNED” and “STEREO” (for a stereo program) appear in the display.

MONO TUNED

STEREO

		VOLUME
ALL DISCS	kHz
	MHz	ß￿

3 Press TUNER MEMORY.

A preset number appears in the display. The stations are stored from preset number 1.

VOLUME

ALL DISCS

ß￿

Preset number

4 Press ENTER.

The station is stored.

5 Repeat steps 1 through 4 to store other stations.

To tune in a station with a weak signal

Press + or – (or TUNING +/– on the remote) repeatedly in step 2 to tune in the station manually.

To set another station to an existing preset number

Start over from step 1. After step 3, turn the shuttle until it clicks to select the preset number where you want to store the other station.

You can preset a station in the selected preset number.

8