Step 3: Presetting radio stations (continued)

1 Press TUNER/BAND repeatedly to select FM or AM.

2 Press and hold + or – (or TUNING +/– on the remote) until the frequency indication starts to change, then release.

Scanning stops automatically when a station is tuned in. “TUNED” and “STEREO” (for a stereo program) appear.

MHz

STEREO

TUNED

3 Press TUNER MEMORY.

A preset number appears in the display. The stations are stored from preset number 1.

Preset number

STEREO

TUNED

4 Press ENTER.

The station is stored.

5 Repeat steps 1 through 4 to store other stations.

To tune in a station with a weak signal

Press + or – (or TUNING +/– on the remote) repeatedly in step 2 to tune in the station manually.

To set another station to an existing preset number

Start over from step 1. After step 3, turn the shuttle until it clicks to select the preset number where you want to store the other station.

You can preset a new station in the selected preset number.

8