Sony Timer-recordingradio, programs, Recording to a tape (continued), — Program Edit, Press, Press, Press CD, Press ENTER, Press CD SYNC, Press REC PAUSE

The track is programed. The program step number appears, followed by the total playing time.

7 To program additional tracks, repeat steps 4 to 6.

Skip step 4 to select tracks from the same disc.

8 Press X to pause at the end of side A.

9 Repeat steps 5 and 6 for the same disc or 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B.

10Press CD SYNC.

Deck B stands by to record in the direction of the indication on nN(the right indication lights to record on the forward side and the left indicator lights to record on the reverse side). The CD player stands by for playback.

11Press DIRECTION repeatedly to select gto record on one side. Select j (or RELAY) to record on both sides.

12Press REC PAUSE. Recording starts.

Press ENTER.

6

Recording to a tape (continued)

Recording a CD by specifying track order

— Program Edit

When programing, make sure the playing times for each side do not exceed the length of one side of the tape.

1 Load a CD and load a recordable tape into deck B.

2 Press CD.

3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display.

4 Press one of DISC 1 – 3 to select a CD.

5 Press . or > until the desired track appears in the display.

Tip

To check the required tape length for recording a CD, press EDIT until “EDIT” flashes after you have loaded a CD and pressed CD. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively (Tape Select Edit).

Note

You cannot use Tape Select Edit for discs containing over 20 tracks.

Timer-recording radio

programs

You can record a preset radio station from a specified time.

To timer-record, you must first preset the radio station (see “Presetting radio stations” on page

11)and set the clock (see “Setting the time” on page 8).

1

2

Tune in the preset radio station (see “Listening to the radio” on page 12).

Press CLOCK/TIMER SET on the remote.

“SET DAILY 1” appears.

3 Press v or V repeatedly to select “SET REC”, then press ENTER.

“ON” appears and the hour indication flashes in the display.

4 Set the time to start recording.

Press v or V repeatedly to set the hour, then press B.

The minute indication starts flashing.

Press v or V repeatedly to set the minute, then press ENTER.

16