Tips

•The program you made remains after Program Play finishes. To play the same program again, press CD, then press nN.

•“--.--” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over.

Using the CD display

You can check the remaining time of the current track or the entire CD.

Press DISPLAY repeatedly.During normal play

Playing time of the current track t Remaining time of the current track t Remaining time of current CD (1DISC mode) or “ --.--” display (ALL DISCS mode) t Clock display (for eight seconds) t Effect status

In stop mode

During Program Play mode when there is a program:

The last track number of the program and the total playing time t Total number of programed tracks (for eight seconds) t Clock display (for eight seconds) t Effect status

Tuner

Presetting radio stations

You can preset up to 20 stations for FM and 10 stations for AM.

1 Press TUNER/BAND repeatedly to select “FM” or “AM”.

2 Press and hold m or M (or TUNING +/– on the remote) until the frequency indication starts to change, then release it.

Scanning stops automatically when the system tunes in a station. “ TUNED” and “ STEREO” (for a stereo program) appear.

3 Press TUNER MEMORY.

A preset number appears in the display. The stations are stored from preset number 1.

Preset number

4 Press ENTER.

“COMPLETE” appears. The station is stored.

5 Repeat steps 1 to 4 to store other stations.To tune in a station with a weak signal

Press m or M (or TUNING +/–on the remote) repeatedly in step 2 to tune in the station manually.

To set another station to an existing preset number

Start over from step 1. After step 3, press . or > repeatedly to select the preset number you want to store the other station.

You can preset a new station in the selected preset number.

continued

CD/Tuner

11