Sony Programing CD tracks, Playing a CD (continued), ––Program Play, 7 Press nN, 5 Press ENTER, 1 Press CD, then place a CD

Playing a CD (continued)

To	Do this
Switch to CD	Press DISC 1 –3 (Automatic
function from	Source Selection). However, if a
another source	CD is used in a program, play does
	not start even if you press CD 1 –
	3.
Remove a CD	Press ZOPEN/CLOSE.
Exchange other	Press DISC SKIP EX-CHANGE.
CDs while
playing
Play repeatedly	Press REPEAT during play until
(Repeat Play)	“ REPEAT ALL” or “ REPEAT 1”
	appears.
	REPEAT ALL*: For all the tracks
	on the CD up to five times.
	REPEAT 1**: For a single track
	only.
	To cancel playing repeatedly, press
	REPEAT until “ REPEAT ALL” or

“REPEAT 1” disappears.

*You cannot select “ REPEAT ALL” and

“SHUFFLE ALL DISCS” at the same time.

**When you select “ REPEAT 1” , that track is repeated endlessly until REPEAT 1 is canceled.

Note

The play mode cannot be changed while playing a disc. To change the play mode, press xfirst to stop play.

Programing CD tracks

–– Program Play

You can make a program of up to 32 tracks from all the CDs in the order you want to play them.

1 Press CD, then place a CD.

2 Press PLAY MODE repeatedly until “PROGRAM” appears in the display.

3 Press one of DISC 1 – 3 to select a CD.

To program all the tracks on a CD at once, proceed to step 5 with “ AL” displayed.

4 Press .or >until the desired track appears in the display.

	Total playing time
Disc number	(including selected track)

Track number

5 Press ENTER.

The track is programed. The program step number appears, followed by the total playing time.

6 To program additional tracks, repeat steps 3 to 5.

Skip step 3 to select tracks from the same disc.

7 Press nN.

To	Do this
Cancel Program	Press PLAY MODE repeatedly
Play	until “ PROGRAM” and
	“ SHUFFLE” disappear.
Clear a track from	Press CLEAR on the remote in
the end	stop mode.
Add a track to	Do steps 3 to 5.
the program in
stop mode
Clear the entire	Press xonce in stop mode or
program	twice during play.

10