7 Press M.

The character you selected in step 6 stops flashing and the cursor shifts to the right.

8 Repeat steps 6 and 7 to complete the entire title.If you make a mistake

Press m or M until the character you want to change flashes, then repeat steps 6 and 7.

To erase a character

Press CLEAR while the character is flashing. You cannot insert characters.

9 Press ENTER to complete the labeling procedure.To cancel labeling

Press MENU.

Tip

When you replace a disc with a CD-TEXT disc, the disc title of the CD-TEXT disc is automatically restored. The Disc Memo of the CD-TEXT disc is no longer stored (disappears) when the disc is removed. Note that you cannot change the Disc Memo of a CD-TEXT disc.

Note

The Disc Memo stores the number of the slot in which the CD was loaded. Re-enter the Disc Memo when loading a new CD into that slot.

Checking the Disc Memos

1Press CD to switch the function to CD.

2Press MENU.

3Press . or > repeatedly until

“ NAME CHECK” appears, then press

ENTER.

4Turn DISC SELECT to select the Disc Memos stored in the system memory between 01 and 60, then press MENU.

To check the current Disc Memo

Press DISPLAY repeatedly until the Disc Memo appears in stop mode.

Erasing a Disc Memo

1Press CD to switch the function to CD.

If “ SHUF” or “ PGM” appears, press PLAY MODE/DIRECTION (or PLAY MODE on the remote*) repeatedly until both disappear.

2Press MENU.

3Press . or > repeatedly until “ NAME ERASE” appears, then press ENTER.

4Turn DISC SELECT to select the disc number with the Disc Memo you want to erase, then press ENTER.

Erasing all Disc Memos of all discs

1Press CD to switch the function to CD.

If “ SHUF” or “ PGM” appears, press PLAY MODE/DIRECTION (or PLAY MODE on the remote*) repeatedly until both disappear.

2Press MENU.

3Press . or > repeatedly until “ ALL ERASE” appears, then press ENTER.

4Press ENTER again until “ COMPLETE” appears.

* MHC-GS200 only

files CD/MP3

17US