Creating your own program
— Program Play
You can make a program of up to 25 steps from all the discs in the order you want to play them. You can synchro record the programmed tracks onto a cassette tape (page 17).
MP3 audio tracks cannot be played on
Using the display window
1 Press CD.
2 Press PLAY MODE in stop mode repeatedly until “PGM” appears.
3 Press D.SKIP (or DISC 1 – 3 or DISC
To program all the tracks on a disc at once, proceed to step 5 with “AL” displayed.
4 Press . or > repeatedly until the desired track number appears.
When programming an MP3, press ALBUM – or + to select album, then press
.or > repeatedly until the desired track number appears.
Disc tray number Selected track number
Total playing time (including selected track)
5 Press ENTER.
The track is programmed.
The program step number appears, followed by the total playing time.
6 Program additional discs or tracks.
To program | Repeat steps |
Other discs | 3 and 5 |
Other tracks on the | 4 and 5 |
same disc |
|
Other tracks on | 3 to 5 |
other discs |
|
7 Press N.
Program Play starts.
Other operations
To | Do this |
Cancel Program | Press PLAY MODE in stop |
Play | mode repeatedly until “PGM” |
| disappears. |
Clear a track from | Press CLEAR in stop mode. |
the end |
|
Tips
•The program you made remains after Program Play finishes. To play the same program again, press CD, then press N. However, the program is cleared when you open the disc tray.
•“–