Sony MHC-GZR333i Using the THEATRE SYNC function

MHC-GZR333i/LBT-LCD77Di.GB.4-181-572-11(1)
35GB
Getting Started
Using the “THEATRE
SYNC” function
THEATRE SYNC allows you to turn on
your Sony TV and this system, changes
the system’s function to “DVD” and then
switches the TV’s input source you have
set with just one button.
Preparing to use the “THEATRE
SYNC” function
Register the TV’s input source connected
to this system.
To select the TV’s input
Press the following buttons while holding
down SLEEP.
Press TV’s input source
0 No input source
(Default)
1 to 8 VIDEO 1 to VIDEO 8
9 COMPONENT 1
CLEAR COMPONENT 2
COMPONENT 3
+ COMPONENT 4
e selected TV’s input source is
memorized into the remote.
Operating the “THEATRE SYNC”
function
Keeping the remote pointed in the
direction of the TV, press THEATRE
SYNC until the TV turns on and the
selected input source changes.
If this function does not work, change the
transmission time. e transmission time
varies depending on the TV.
To change the transmission time
Press the following buttons while holding
down .
Press Transmission time
(seconds)
1 0.5 (Default)
2 1
3 1.5
4 2
5 2.5
6 3
7 3.5
8 4
Note
is function is only for Sony TV series,
however, some TV products may also not work.