Waking up to music
—
You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 2: Setting the time”).
9 TIMER SELECT
3 4,5,6, 2
7,8
1 Prepare the music source you want to play.
•CD: Insert a CD. To start from a specific track, make a program (see “Programming the CD tracks” on page 22).
•Tape: Insert an tape with the side you want to play facing forward.
•Radio: Tune in the preset station you
want (see “Step 3: Presetting radio stations” on page 8).
2 Adjust the volume.
3 Press CLOCK/TIMER SET.
“SET (DAILY 1)” appears.
4 Turn jog dial to select “DAILY 1 (or 2)”, then press ENTER/NEXT.
“ON” appears and the hour digits flash in the display.
5 Set the time to start playback.
Turn jog dial to set the hour, then press
ENTER/NEXT.
The minute indication starts flashing.
Turn jog dial to set the minute, then press ENTER/NEXT.
The hour indication flashes again.
6 Set the time to stop playback following the above procedure.
7 Turn jog dial until the music source you want appears.
The indications change as follows:
nTUNER ˜CD PLAY N nTAPE PLAY N
8 Press ENTER/NEXT.
The type of timer (DAILY 1 or DAILY 2), followed by the start time, stop time and the music source, appears, then the original display appears.
9 Turn off the power.
continued
39