Timer-recording radio

programs

You can record a preset radio station from a specified time.

To timer-record, you must first preset the radio station (see “Presetting radio stations” on page

13)and set the clock (see “Setting the clock” on page 10).

1 Tune in the preset radio station (see “Listening to the radio” on page 15).

2 Press CLOCK/TIMER SET on the remote.

“DAILY SET” appears.

3 Press . or > on the remote repeatedly to select “REC SET”, then press ENTER on the remote.

“ON” appears and the hour indication flashes in the display.

4 Set the time to start recording.

Press . or >on the remote repeatedly to set the hour, then press ENTER on the remote.

The minute indication starts flashing. Press . or >on the remote repeatedly to set the minute, then press ENTER on the remote.

5 Repeat step 4 to set the time to stop recording.

The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”), then the original display appears.

6 Load a recordable tape into deck B.7 Press ?/1 to turn off the system.

When the recording starts, the volume level is set to minimum.

Other Operations

To

Do this

Check the

Press CLOCK/TIMER SELECT

setting

on the remote and press .or

 

>on the remote repeatedly to

 

select “REC SELECT”, then press

 

ENTER on the remote.

 

 

Change the

Start over from step 1.

setting

 

Cancel the timer

Press CLOCK/TIMER SELECT

 

on the remote and press .or

 

>on the remote repeatedly to

 

select “TIMER OFF”, then press

 

ENTER on the remote.

 

 

Notes

•If the system is on at the preset time, the recording will not be made.

•When you use the Sleep Timer, Timer-recording and Daily Timer will not turn on the system until the Sleep Timer turns it off.

•You cannot activate the Daily Timer and Timer- recording at the same time.

Tape

19GB