4 Press . or > repeatedly to select “DAILY 1 (or 2)”, then press
ENTER.
“ON” appears and the hour indication flashes in the display.
1
5 Set the time to start playback.
Press . or > repeatedly to set the hour, then press ENTER.
The minute indication starts flashing.
1
Press . or > repeatedly to set the minute, then press ENTER.
The hour indication flashes again.
6 Set the time to stop playback following the above procedure.
7 Press . or > repeatedly until the music source you want appears.
The indication changes as follows:
tTUNER y CD PLAY T t TAPE PLAY T
8 Press ENTER.
The type of timer (DAILY 1 or DAILY 2), followed by the start time, stop time, and the music source, appear, then the original display appears.
9 Turn off the power.
To check the settingPress CLOCK/TIMER SELECT and press
.or > repeatedly to select the respective mode (DAILY 1 or DAILY 2), then press ENTER.
To change the setting, start over from step 1.
To cancel the timer operationPress CLOCK/TIMER SELECT and press
.or > repeatedly to select “TIMER OFF”, then press ENTER.
Tip
The power turns on 15 seconds before the preset time.
Notes
•You cannot activate DAILY 1 and DAILY 2 Timer at the same time.
•You cannot set the timer if the starting time and stopping time are the same.
•When you use the Sleep Timer, Daily Timer will not turn on the system until the Sleep Timer turns it off.
•You cannot activate Daily Timer and Timer- recording at the same time.
47