11
CD/VIDEO CD
To Do this
Switch to CD
function from
another source
Press DISC 1 – 3 (Automatic
Source Selection). However, if a
CD is used in a program, play does
not start even if you press CD 1 –
3.
Remove a CD Press Z OPEN/CLOSE.
Exchange other
CDs while
playing
Press DISC SKIP EX-CHANGE.
Play repeatedly
(Repeat Play) Press REPEAT during play until
“REPEAT” or “REPEAT 1”
appears.
REPEAT*1: For all the tracks on
the CD up to five times.
REPEAT 1*2: For a single track
only.
To cancel playing repeatedly, press
REPEAT until “REPEAT” or
“REPEAT 1” disappears.
*1You cannot select “REPEAT” and “SHUFFLE
ALL DISCS” at the same time.
*2When you select “REPEAT 1”, that track is
repeated endlessly until REPEAT 1 is canceled.
Playing a track by entering the track
number
Press the number button(s) on the remote to
enter the track number of the track you want to
play.
To enter a track number over 10
1Press >10.
2Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To play track number 30, press >10, then 3 and
10/0.
Programing CD tracks–– Program Play
You can make a program of up to 32 tracks
from all the CDs in the order you want to play
them.
1Press CD, then place a CD.
2Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
3Press one of DISC 1 – 3 to select a CD.
To program all the tracks on a CD at once,
proceed to step 5 with “AL” displayed.
4Press . or > until the desired
track appears in the display.
Disc tray number Total playing time
(including selected track)
Track number
5Press ENTER.
The track is programed. The program step
number appears, followed by the total
playing time.
6Program additional discs or tracks.
To program Repeat steps
Other discs 3 and 5
Other tracks on the
same disc 4 and 5
Other tracks on other
discs 3 to 5
continued