Recording from a tape (continued)

3 Press DIRECTION MODE repeatedly to select A to record on one side. Select ß (or RELAY) to record on both sides.

4 Press P PAUSE.

Dubbing starts.

To stop dubbing

Press π on deck A or B.

Tips

When you dub on both sides, start recording from the front side. If you record from the reverse side, recording stops at the end of the reverse side.

If you set DIRECTION MODE to ß when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together.

You don’t have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A.

Note

Dolby NR and DIRECTION MODE (ß or RELAY) is off when the mains AC power supply is switched off.

18