To return the DVD setup to the default settings, perform reset as follows:

1Press DVD SET UP in stop mode.

2Press M or m repeatedly to select “RESET”, then press ENTER.

3Press M or m repeatedly to select “YES”, then press ENTER.

It takes a few seconds to complete. Do not press ?/1 when resetting the system.

Messages

One of the following messages may appear or flash in the display during operation.

DVD/VIDEO CD/CD/MP3/JPEGCannot Play

A disc that cannot be played was inserted.

A disc with an unsupported Region code was inserted.

Cannot Use

You pressed an invalid button.

Data Error

The JPEG file is an unsupported format.

No Disc

There is no disc in the CD/DVD player.

Play Limit

The MP3 file cannot be played.

Push STOP!

You pressed PLAY MODE during play.

Reading

The system is reading information of the disc. Some buttons are not available.

Step Full!

You tried to program 26 or more tracks (steps).

TapeNo Tab

You cannot record the tape because the tab has been removed from the cassette.

No Tape

There is no tape in the tape deck.

Troubleshooting

61GB