Cartridge Back-/Spine Print
III. Print Film
(Cartridge Back-/Spine Print)
It is recommended to print in positive type follo- wing information with white ink on the cartridge:
Spine: artist name and disc title.
Backside: artist name, disc title, catalogue num- ber, track titles and durations, etc.
The MD Logo shall not be inserted, as it already appears on the lower cartridge.
Print location for the spine is on the cartridge edge opposite to the loading end.
During preparation of the print film please mind the following:
•Combine spine- and backside typesetting on one film.
•Use coated positive screenprinting line films (min. line width 0.15 mm, high density, emulsion side up); positioning marks must be located out- side the print area.
•The films must not reveal damage of any kind and must be packed in such a way so as to pre- vent folding or creasing (roll container or carton).
•Please don't encircle the printing area on the film.
All dimensions in mm
Print area dimensions:
59.0
3
R 12
52.4
5.5
14.2
M A R I A H C A R E Y E m o t i o n s
Character size 7pt
MARIAH CAREY EMOTIONS
1.EMOTIONS
2.AND YOU DON'T REMEMBER
3.CAN'T LET GO
4.MAKE IT HAPPEN
5.IF IT'S OVER
6.YOU'RE SO COLD
7.SO BLESSED
8.TO BE AROUND
8.YOU
9.TILL THE END
9.OF TIME
10.THE WIND
COLUMBIA
468851 2 BIEM/STEMRA
LC 0162 
WARNING: All Rights Reserved.
|
| Character size min. 5pt | Lower Cartridge |
31.7 |
| min. linewidth 0.15mm |
|
22DADC
A U S T R I A
