Sony MSAC-SR1 Removing the “Memory Stick”, Note, Precautions

Note

The processing lamp lights while data is transferred between the “Memory Stick” and the PC. While transferring data, do not remove the “Memory Stick”. Doing so may damage the data.

Removing the “Memory Stick”

Make sure that the processing lamp goes off, and press the eject button. The “Memory Stick” ejects.

Processing lamp

Press the eject button.

Precautions

•If the AC power adaptor or the serial cable is disconnected while transferring data between the “Memory Stick” and the PC or while displaying a picture on the PC, data transfer will be stopped.

If the AC power adaptor becomes unplugged, exit the PictureGear 3.2Lite software, remove the “Memory Stick” and re-plug in the AC power adaptor. Then, restart the software and perform the transferring procedure.

If the serial cable is disconnected, exit the PictureGear 3.2Lite software, unplug the AC power adaptor, connect the serial cable firmly and then re-plug in the AC power adaptor. After that, restart the software and perform the transferring procedure again.

•If data transfer still cannot be performed successfully, disconnect and reconnect the serial cable connector on the MSAC-SR1 or unplug and re-plug in the AC power adaptor.

9-EN