Sony MSAC-US2 22-US, For Windows (continued), Removing a “Memory Stick”, 4 Cancel the setting, – For Windows Me/2000/XP –, 5 Remove and then re-insertthe “Memory Stick.”

For Windows (continued)

4 Cancel the setting.

1Set “Content type” to “Pictures.”

2Check “Select an action to perform” under “Actions” select “Take no action,” then click “Apply.”

3Set “Content type” to “Video files” and “Mixed content,” and repeat step 2.

4Click “OK.”

The “properties” screen closes.

5 Remove and then re-insert the “Memory Stick.”

“Image Transfer” starts up automatically and the images are automatically copied to the computer.

Removing a “Memory Stick”

– For Windows Me/2000/XP –

After the copying of image data is complete, those using Windows Me/ 2000/XP must follow the procedures outlined below before removing the “Memory Stick,” and before disconnecting this unit from the computer.

1 Click the “Remove Hardware” icon located in the Task tray at the bottom right-hand corner of the screen.

A message will appear.

2 Click on the little message [e.g., Stop USB Disk-Drive (F:)*] that appears over the Task tray. The message will differ slightly depending on which version of Windows you are using.

After a little while, a message appears.

*The drive letter that appears (e.g., (F:)) will differ depending on the configuration of the computer you are using.

22-US