Precautions for use of “Memory Stick”
A | How to affix |
B | labels |
|
C
•Recording, editing and deleting are prevented when the
•Use a pointed object to move the
•Never remove the “Memory Stick” while the access lamp is blinking (while data is being read/written).
•Data may be corrupted in the following cases.
–If the “Memory Stick” is removed or the power of this main unit is turned off while the access lamp is blinking (while data is being read/ written)
–When used in a location subject to static electricity or electrical noise
•Always backup important data. Sony does not accept liability for damage of the data.
We cannot accept responsibility in the event that data is lost or damaged and the unit is damaged, while using this unit.
•Data copyright protected by “MagicGate” can only be used with a “MagicGate” compatible “Memory Stick.”
•Do not affix any label other than those specially provided to the “Memory Stick.” C
•When affixing labels, affix these at the designated positions. Labels should not protrude from the edges of the “Memory Stick.”
•Do not apply excessive force when writing in the memo area of a “Memory Stick Duo.”
•When transporting or storing a “Memory Stick,” place it in the supplied storage case.
•Do not touch the connector section with fingers or metallic objects. A
•Do not bend, drop or subject the “Memory Stick” to strong impacts.
•Do not attempt to disassemble or modify the “Memory Stick.”
•Do not wet with water.
•Do not use or store in the following environments:
–Where the temperature is too high (in a car with closed windows during summer, in direct sunlight, near a heater, etc.)
– Humid or corrosive locations